If you've been exploring our trampoline lineup, you probably know that we offer two main design styles: Inside Enclosure Nets (In-Net) and Outside Enclosure Nets (Out-Net).
As the name suggests, in-net trampolines position the safety enclosure net inside the pole frame—directly between the jumping mat and the heavy-duty springs. The biggest advantage? Superior protection that prevents jumpers from contacting the spring area, adjustable net tension, and a sleek, high-end look.
On the other hand, out-net trampolines mount the net on the exterior of the frame poles. They are simpler to install and offer the visual appeal of a larger usable jumping surface.
After analyzing years of customer feedback and setup questions, we noticed that DIY installers frequently make a few small—yet critical—errors when assembling inside-net models.
To help you save time and avoid tearing down your frame to restart, we’ve rounded up the top 3 installation mistakes and how to easily prevent them!
1. Installing the Inside Net like an Outside Net
This is by far the most frequent—and most dangerous—mistake new trampoline owners make.
During assembly, installers often reflexively stretch the enclosure net around the outside of the support poles and springs, accidentally converting an inside-net design into an improper setup.
- Why it happens: Without carefully checking the manual, it's easy to assume the net simply wraps around the exterior frame. However, the core design of an inside net is to act as a barrier between the jumper and the steel springs.
- The Risk: Placing the net on the outside exposes the spring zone inside the bouncing area. Jumpers can easily step into the gaps between springs, leading to awkward falls, pinched feet, or impact injuries.
-
The Fix: Before securing the top hanging loops, verify that the net hangs inside the spring line. The bottom of the safety net should attach directly to the V-rings or perimeter of the jumping mat, completely isolating the metal springs outside the jump zone.
2. Skipping the Bottom Attachment (Leaving the Net "Floating")
Once the enclosure poles are up and the net is lifted, many people assume the hard part is over and leave the bottom edge untouched.
- Why it happens: Users often think gravity will hold the net down, or they consider weaving the bottom attachment cord too tedious.
- The Risk: An unanchored net dangles freely in the air. During energetic bouncing, children can easily slide underneath the gap, catch their feet in the loose mesh, or tumble off the mat onto the frame.
- The Fix: Always use the included attachment lacing rope/straps to weave the bottom edge of the net into the V-rings of the jump mat. Pull the rope tight as you weave around the perimeter. A properly laced bottom edge leaves zero gaps for little feet or bodies to slip through.
3. Rushing the Safety Pad (Spring Cover) Setup
The spring safety pad serves as your secondary line of defense against hard frame impacts. Unfortunately, it’s often treated as an afterthought during assembly.
- Why it happens: Users may lay the padding over the frame without securing every tie strap, or fail to center the pad evenly over the metal hardware.
- The Risk: Trampolines vibrate heavily during play. Loose, untied safety pads will quickly shift, flip over, or bunch up, exposing raw steel frames and rigid springs to bare feet.
- The Fix: 1. Center the pad so that it completely covers all springs and the entire perimeter frame rail. 2. Patiently tie every single securing strap underneath the frame or to the corresponding ring anchors. Ensure the pad sits flat, tight, and flush against the frame.
💡 The Bottom Line: Safety First, Bounce Second
Setting up an inside-net trampoline isn't complicated—it just requires paying attention to a few vital details.
Before calling your assembly project complete, keep these three rules in mind:
-
Check the Structure: Ensure the net sits inside the spring boundary.
- Secure the Base: Lace the bottom mesh tight—never leave it floating.
- Cover the Hardware: Ensure the safety pad completely hides the springs; every strap is tied securely.
A trampoline brings years of fun and healthy exercise to the whole family, but safety is always the priority. Taking a few extra minutes to tighten every strap and lace every knot guarantees a worry-free bouncing experience!
Got questions about your model or need step-by-step guidance? Check out our video installation guides or contact our customer support team—we're always here to help!
